Little Giant FLS400 1/2 HP Dewatering Pump (20' Cord)
SKU: LG-620240
Little Giant FLS400 1/2 HP Dewatering Pump (20' Cord) (620240)
The FLS-400 is a heavy duty industrial dewatering pump. Its double mechanical seals, urethane rubber semi-vortex impeller, stainless steel shell and suction strainer make this pump ideal for general construction dewatering and applications where quality and reliability are needed. Used primarily for clean or dirty water but not sewage or effluents.
This 1/2 horsepower pump has a maximum flow of 3600 GPH/ 60 GPM and a maximum head of 37' (16 PSI).
- 2” MIPT discharge, 20’ power cord, 115v
- 1/2 horsepower permanent split capacitor motor with overload protection
- Designed for continuous duty
- Stainless steel shell and suction strainer
- Stainless steel shaft
- Upper and lower ball bearings
- Dual mechanical seals
- Lower seal: Silicon carbide on silicon carbide
- Upper seal: Carbon on ceramic
- UL/CSA listed
Ratings -
- HP 60Hz - 1/2 hp
- Frequency - 60 Hz
- Phase - Single-Phase
- Amps - Full Load - 5 A
- Amps - Starting - 24 A
- Full Load Watts - 488 W
- Volts - 115 VAC
- Cord Length - 20 ft
- Pump Power Cord Type - SJTW
- Pump Power Cord Gauge - 16-3
- Motor Type - Submersible
- Continuous Duty - Yes
- Thermal Overload Protection - Yes
Operation -
- Maximum Flow Rate - 60Hz - 60 gpm
- Rated Flow Rate - 60Hz - 60 gpm
- Shut-Off - 37 ft
- Shut Off Height - 60Hz - 37 ft
- Max PSIG - 60Hz - 16 PSI
- Max Solid Handling Size - 0.06 "
- Switch Type - Manual
- Motor Cooling - Oil
Liquid -
- Max Fluid Temperature - 104 °F
Materials of Construction -
- Pump Base Material - Cast Iron GG-20
- Pump Body Material - Stainless Steel
- Pump Volute Material - Cast Iron
- Impeller Type - Semi-open
- Impeller Material - Thermoplastic
- Motor Shaft End - Material - Stainless Steel
- Discharge Material - Aluminum
- Intake Screen Material - Stainless Steel
- Fasteners Material - Stainless Steel
- Top Bearing Material - Steel
- Top Bearing Type - Ball
- Bottom Bearing Material - Steel
- Bottom Bearing Type - Ball Bearing
- Seal Material - Viton Retainer
- Seal Type - Retainer
Installation -
- Discharge Type - Threaded - MNPT
- Discharge - 2 "
- Product Length - 7.99 "
- Product Width - 7.99 "
- Product Height - 11.93 "
- Pump Length - 8 "
- Product Weight - 25.5 lb
- Product Weight w/ Pack - 26 lb
- Carton Length - 10 "
- Carton Width - 10 "
- Carton Height - 13 "
Other -
- Accessories Included - None
- Electrical Agency Approvals - cCSAus
- Standard Warranty - 12 Months
| US GPM Flow @ Total Head in Feet | Max Head | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 5' | 10' | 15' | 20' | 25' | 30' | 35' | 40' | 45' | 50' | ||
| LG/620240 | 59 | 54 | 49 | 42 | 34 | 22 | 6 | 37' | |||
| LG/620241 | 76 | 71 | 66 | 61 | 54 | 47 | 37 | 25 | 7 | 52' | |