• Home
  • SJE MYSPY WIFI Messenger Alarm w/o Float

SJE MYSPY WIFI Messenger Alarm w/o Float

SKU: SJE-A1043657
(0) No Reviews yet

In Stock

SJE MYSPY WIFI Messenger Alarm w/o Float

WiFi Alarm System Provides 24/7 Remote Notification

Easy-to-Install indoor alarm system with WiFi connectivity, remote notification, battery backup and auto reset.

The MySpy™ WiFi Messenger system monitors and reports any residential alarm condition (contact closure), works with a high water level (float switch), or under/over temperature alarms. When the contact closes, the alarm notifies the user locally (audible and visual alarm) and remotely via SMS text messages and/or emails over a WiFi or Ethernet network to a smartphone, tablet or computer.

The alarm works with your existing WiFi or Ethernet network, so it does not rely on cellular connection which means no monthly fees or contracts. Easy installation and setup!


  • NEMA 1 enclosure rated for indoor use
  • Automatic alarm reset
  • LED indicators for alarm (red), power on (green) and network status (blue)
  • Alarm test, horn silence and WPS connection buttons
  • WiFi or Ethernet connectivity for remote alarm notification
  • Text and/or email notifications: alarm, power lost, power restored, low battery and alarm offline
  • Notifies up to 4 contacts (2 text, 2 email contacts)
  • If primary power fails, the alarm continues to operate locally due to 9 VDC battery backup (not included)
  • Low battery chirp
  • External terminal block for easy float switch installation
  • Auxiliary contacts included to connect to remote device
  • Can serve as a high or low level alarm depending on float switch model
  • Optional float switch models and splice kit available
  • CSA Certified
  • Five-Year Limited Warranty

  • Voltage: Primary: 120 VAC, 60 Hz, 2.4 watts max. (alarm condition) Secondary: 9 VDC
  • Battery Backup Power: 9 VDC
  • Alarm Enclosure: 6 x 4 x 2.25 inches (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic
  • Alarm Horn: 87 decibels at 10 feet (3 meters)
  • Auxiliary Alarm Contacts: Voltage: 120 VAC
  • Current: N/C
  • Power Cord: 6 foot (1.8 meter)
  • Float Switch Connection Terminal: For float switch connection only. Do not apaply power. (Voltage across terminals is 8-9 VDC)
  • FLOAT SWITCH: SJE SignalMaster® control switch with mounting clamp
  • Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water resistant (CPE)
  • Float: 2.74 inch diameter x 4.83 inch long (7 cm x 12.3 cm), high impact, corrosion resistant poly propylene housing for use in sewage and non-potable water to up 140oF (60oC)
  • Maximum Water Depth: 30 feet (9 meters), 13 PSI
  • Electrical: 5 amps, 125 VAC/250 VAC, 50/60 Hz

WIFI: Connect using push-button WiFi Protected Setup (WPS) or manually by using Ethernet connection (ethernet cable not provided).

ETHERNET: Requires an ethernet connection (ethernet cable not provided).

NOTE: Cellular WiFi hotspots are not recommended for use with this WiFi alarm, as intermittent or unreliable notification service can result.

Ratings & Reviews

No reviews available

Be the first to Write a Review