• Home
  • SJE Tank Alert AB Duo Alarm System

SJE Tank Alert AB Duo Alarm System

SKU: SJE-1038473
(0) No Reviews yet
$349.98

In Stock

Call for Quote

SJE Tank Alert AB Duo Alarm System


120 VAC w/ 15’ SJE SignalMaster High Level w/ Auxiliary Contacts.
Indoor Dual Alarm System with Auto Reset and Battery Backup.


The Tank Alert AB DUO indoor alarm monitors two liquid level conditions in one easy-to-install alarm in lift pump chambers, sump pump basins, holding tanks, sewage, agricultural, filters and other waste applications.


The sleek design of the alarm features a user friendly touch pad with colored LED indicators for easy visual detection. The alarm horn and red LED indicator activate for a high water alarm condition. The alarm horn and yellow LED indicator activate for alarm 2. The green LED indicates 120V primary power to the alarm. Once the condition is cleared, the alarm automatically resets.


Features:


  • NEMA 1 enclosure, designed for ease of installation, rated for indoor use
  • Automatic alarm reset
  • Red "alarm 1" light, yellow "alarm 2" light, and green "power on" light, alarm "test" switch, and horn "silence" switch
  • Alarm horn sounds at 87 decibels at 10 feet (3 meters)
  • Can be used with any switching mechanism rated to include 1 amp, 9 VDC load
  • If primary power fails, the alarm system continues to work due to battery backup feature (battery not included)
  • Switching mechanism operates on low voltage and is isolated from the power line to reduce the possibility of shock
  • Low battery chirp
  • Easy access battery compartment
  • External terminal block for easy float switch installation
  • VOLTAGE FOR 120V MODEL:
    • Primary: 120 VAC, 60 Hz, 2.4 watts max. (alarm condition)
    • Secondary: 9 VDC
    BATTERY BACKUP POWER:
    • 9 VDC
    ALARM ENCLOSURE:
    • 6 x 4 x 2.25 inches (15.24 x 10.16 x 5.71 cm), NEMA 1 plastic
    ALARM HORN:
    • 87 decibels at 10 feet (3 meters)
    POWER CORD:
    • 6 feet (1.8 meters)
    AUXILIARY ALARM CONTACTS (optional):
    • Voltage: 120 VAC
    • Current: 0.5 amps maximum
    FLOAT SWITCH CONNECTION TERMINAL:
    • For float switch connection only. Do not apply power. (Voltage across terminals is 8-9 VDC)
    FLOAT SWITCH:
    • SJE SignalMaster control switch with mounting clamp
    • Cable: 15 feet (4.57 meters), flexible 18 gauge, 2 conductor (UL) SJOW, water-resistant (CPE)
    • Float: 2.74 inches diameter x 4.83 inches long (7.0 cm x 12.3 cm), high impact, corrosion resistant polypropylene housing for use in sewage and water up to 140°F (60°C)

    Ratings & Reviews

    No reviews available

    Be the first to Write a Review