5/8" x 3/4" Water Meter (Direct Read, US Gallons)

5/8" x 3/4" Water Meter (Direct Read, US Gallons)

Cold Water Meter with 3/4" Male NPT Couplings. Ideal for 1/4-20 GPM flow rates on 3/4" cold water lines. The meter connects to 3/4" both sides and is ideal for monitoring residential water flow.

• The ideal water meter for sub-metering, leak detection and low flow monitoring
• The sweep hand indicates usage down to 1/10 of a gallon
• There is a trickle leak indicator on the dial to indicate any flow at all

Installation:

• Thoroughly flush the service line upstream of the meter to remove dirt and debris
• Set the meter inline (cold water models can be either vertically or horizontally installed) Hot water meters must be installed horizontally with the register facing upwards
• Make sure the water flow follows the arrow cast on the meter body
• Slowly open any upstream valves to prevent damage to the meter