3/4" Pressure Relief Valve Stainless Steel (Set 100 PSI)

3/4" Pressure Relief Valve Stainless Steel (Set 100 PSI)

Pressure relief valves are recommended for all cold water system installations to protect against damage to piping and pressure tanks. Relief valves must be installed so that they drain to a floor drain, sump or other safe location with an air break. If an outlet pipe is used then it must be at least the same diameter as the relief valve outlet.

This 3/4" stainless steel relief valve is non-adjustable and pre-set to open at 100 PSI.

Note:

Use with (PA/SSTT) SS thread tape