1.5 cu/ft Neutralizing Filter w/Clack Timer Control Valve
1.5 cu/ft Neutralizing Filter w/Clack Timer Control Valve
A neutralizing filter stops the corrosion of metal components and fixtures within a plumbing system by neutralizing the acidic nature of supply water that has a pH of less than 7. Periodic backwashing of the media bed cleans it of captured impurities.
Features and Benefits
- Increases the pH of acidic water
- Eliminates the corrosion of plumbing and fixtures caused by low pH water
- No more “green stain” copper deposits in tubs, toilets, and sinks
- Better tasting pH balanced water
- Low maintenance due to automatic operation
Media
These systems use a high quality granular calcite (calcium carbonate) media to accomplish the neutralization process. As low pH water flows down through the media bed it reacts with the calcite media and dissolves it. This causes the pH of the water to move from an acidic state to a neutral state. This dissolving of the calcite media will require calcite to be added to the bed over time.
The tanks are NSF
Control Valve Features:- Fully automatic backwash control valve.
- Will not over correct pH.
- Uses Calcite (crushed) marble.
- Additional sizes and options available.
- Voltage: 120VAC
- Frequency: 60Hz
- Power consumption: 7 Watts Maximum
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
| Item # | Media | Flow Rate | Mineral Tank | ||
|---|---|---|---|---|---|
| Service | Peak | Backwash | |||
| CLK/KN1 | 1 cu/ft | 3 | 6 | 5.3 | 9 x 48 |
| CLK/KN15 | 1.5 cu/ft | 4 | 10 | 7.5 | 10 x 54 |