Wednesday, September 2, 2015

Rainwater Harvesting Filtration and Collection system.

• Collects, filters and cleans rainwater from downspouts
• Filter out leaves, dirt and other contaminants
• Use to top up rain barrels, pools and ponds
• Good for watering lawns and gardens
• Hose outlet fits standard hoses

Installation Instructions:

1. Remove 29.3" of downspout from where the Clean Rain is to be situated. Ensure all edges are clean and smooth.
2. Remove the cap and use snips to remove a section to fit the downspout.
3. Remove the cover by flexing outwards at the top.
4. Fit the correct downspout adapter to the bottom of the Clean Rain.
5. Slide the cap up the top section of downspout and hold temporarily in place.
6. Install the Clean Rain by positioning it securely on the bottom section of downspout.
7. Screw the top of the Clean Rain in position through the screw slots provided. Ensure appropriate screws and anchors (if required) are used.
8. Check the placement of the Vibrating Screen. It must sit behind and below the front face.
9. Insert the Leaf Slide into slot holes
10. Re-install the front cover.
11. Slide the cap back down the downspout until it sits securely on top of the Clean Rain unit.

CLICK HERE FOR DEMO VIDEO